De-Icer Controllers

NEW C-10 Thermostat Controller

Kasco's NEW C-10 Thermostat Controller is an inexpensive way to control the operation of your De-Icer. The C-10 uses an Air Temperature Thermostat to turn the De-Icer on when the temperature drops below a set point that you decide. The C-10 will save you money on your electric bill and pay for itself with savings. One C-10 controls one 120V De-Icer.

Kasco's NEW C-10 Thermostat Controller is designed to save you money on your electric bills. The C-10 differs from our existing C-20 Controller, in that, it only uses Air Temperature to operate the De-Icer. The C-10 is a simple and inexpensive way to save money and operate your Kasco De-Icer only when it is needed.

To operate, you simply use the dial to set a temperature in which you want the De-Icer to turn on and plug the C-10 into a standard 120V outlet. The Kasco De-Icer then plugs into the C-10 Controller. When air temperature drops to the set reading, the De-Icer will operate. When the temperature rises, it will turn off. There is a built in 2.5 degree Fahrenheit differential within the controller.

It is recommended to set the temperature dial at 30 degrees Fahrenheit.

Using a Kasco 1/2hp, 2400D De-Icer and a C-10 Controller, you can avoid the hassle and expense of removing your dock and boat for as little as $15 per month!


Owner's Manual (PDF) >


C-20 Timer/Thermostat Controller

Kasco Marine, Inc. offers the C-20 Time and Temperature Control Box to control the amount of use of the De-Icer and to save on your electrical bill. One C-20 will control one 120V De-Icer and is a great addition to a De-Icing system. It uses BOTH an Air Temperature Thermostat and a Timer Clock to operate the De-Icer. It will pay for itself with electrical savings.

Kasco's C-20 Time and Temperature De-Icer Control is designed and engineered exclusively for outdoor use to operate your Kasco De-Icer with maximum energy conservation. How the control box is used will vary by region, but as a general guideline, most people will be able to reduce operation time and energy consumption by an additional 50-66%. Users in more severe conditions, such as the Great Lakes, will see less savings. The C-10 Time and Temperature Controller will save you money on your electric bills!

Using a Kasco 1/2hp, 2400D De-Icer and a C-20 Controller, you can avoid the hassle and expense of removing your dock and boat for as little as $15 per month!

The C-20 Time and Temperature Control Box is designed to utilize BOTH the Time AND Temperature features. By utilizing both functions, you can save power by only having the De-Icer running while it is cold enough and in set time intervals. It is recommended to have the unit on in at least 2 hour intervals to set up a proper circulation. Each situation is different and the amount of time needed to maintain an ice free area will differ accordingly. Also, conditions do vary during the year so operation may have to be altered to fit the conditions. Please see the link to Owners Instructions below to see installation and operation instructions, as well as operation recommendations.

The timer pins should be pulled upward for the desired time frame the De-Icer should be set to run. The thermostat dial should be set to the outside temperature the De-Icer should operate. When, and only when, the temperature drops below the temperature the thermostat is set in a time frame that the timer is ON (pins pulled upward), the De-Icer will operate.

  Timer Thermostat De-Icer
  Off Off Off
  On Off Off
  Off On Off
  ON ON ON



Owner's Manual (PDF) >


 

Questions? Call 715-262-4488 or send an email.